[Esc+Nc] Eject And Cut - SATO CL4NX Programming Reference Manual

[ESC+NC] Eject and Cut

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifies eject and cut operation.
[Format]
<NC>
[Coding Example]
<A>
<NC>
<Z>
(1) Label stop position
A: Printed
B: Not printed
C: Not printed
D: Not printed
(2) Command received
(3) Label is fed to the cut position.
(4) Label is cut off.
(5) Label is back fed to the print position.
[Supplementary Explanation]
• Valid only for cutter models.
• This command is used to cut the last label remaining in the printer.
• This command <NC> should be used by differentiating between Start code <A> and Stop code
<Z>.
• This command <NC> may not be used in combination with other commands.
• This command <NC> is valid when the printer still holds the label which is not cut after being
printed.
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between
items
341
NC
<4E> <43>
16 16
The set command is not maintained.
The set command becomes invalid.
The set command becomes invalid.
Feed direction
Parameter
Nil
(1)
(2)
(3)
(4)
(5)