[Esc+Wk] Job Name - SATO CL4NX Programming Reference Manual

[ESC+WK] Job Name

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying job name for status return.
[Format]
<WK>aaaaaaaaaaaaaaaa
• Parameter
a [Job Name] = ASCII code 16-digit, Shift JIS Kanji 8-digit
[Coding Example]
Job name: SATO
<A>
<ID>01
<WK>SATO
<V>200<H>100<P>0<$>B,100,100,6
<$=>SATOPRINTER
<Q>2
<Z>
[Supplementary Explanation]
• When Status 4 is used for interface protocol, specified job name can be set to the telegraphic
status.
• Status can be confirmed sending status request (ENQ).
• Include this command within items and use between start code <A> and stop code <Z>.
• This command can be used in combination with Job ID Number <ID>.
[Note]
• In status return interface protocol, this command becomes valid when status request (ENQ) is
received while printing (QTY≠0, includes at the time of Offline and Error).
• In status return communication protocol, if status request (ENQ) is received when printing is not
in progress (QTY=0, No received data when power is ON), space (20H) will be set to status and
returned.
• When Job ID Number <ID> is used more than twice within the items of <A> and <Z>, the last
specified value becomes valid.
• For more information, refer to the "Interface Specifications".
Parent topic Control command
ESC WK
<1B> <57>
16
aaaaaaaaaaaaaaaa=<20>
When the power is OFF
Valid range within items
Valid range between items
Parameter
<4B> aaaaaaaaaaaaaaaa
16 16
16
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set command becomes invalid.
30