[Dc2+Db] Initialization - SATO CL4NX Programming Reference Manual

[DC2+DB] Initialization

Command
Hexadecimal code
Initial Value
Valid range and term of
command
[Function]
This command initializes the printer setting.
[Format]
[DC2] DB,aa
[Parameters]
Symbol Parameter
a Identifier
DC2
<12>
16
None
When turning off the power
Valid range
Printer operation in
progress
When acquiring label
sensor information
Error
Valid range
name
CA: Common settings
initialization
CB: Warning function
initialization
II: IEEE1284 settings
initialization
IR: RS-232C settings
initialization
IL: LAN settings initialization [LAN] section
IU: USB settings
initialization
IW: WLAN settings
initialization
IB: Bluetooth settings
initialization
IE: EXT settings
initialization
IF: RFID settings
initialization
IN: NFC settings
initialization
DB
<44> <42>
16 16
-
-
The command cannot be received during the printer
operation. ([NAK] return)
Commands are not accepted while acquiring sensor
information. ([NAK] reply)
The command cannot be received while an error is
occurring. ([NAK] return)
Initialization target
[PRINTER] section
[COUNT] section
[IEEE1284] section
[RS-232C] section
[USB] section
[WLAN] section
[BLUETOOTH] section
[EXT] section
[RFID] section
[NFC] section
595
Parameter
,aa
Acquisition
method
Two characters fixed
acquisition