SATO CL4NX Programming Reference Manual page 335

[Supplementary Explanation]
• If using the label smaller than the head width, use this command for specifying the label size
and adjust the start point position corresponding to the label size.
• For specifying the label size, include the size of backing paper.
(Side alignment, 8 dots/mm)
Start point
1
1
80mm×100mm
640dots
(960dots)
167.5mm
1340dots
(2010dots)
Value inside ( ) is 12 dots/mm
(Center alignment, 8 dots/mm)
Start point
1
1
Label
80mm×100mm
80mm
640dots
(960dots)
112mm
896dots
(1344dots)
Value inside ( ) is 12 dots/mm
Parent topic System Command
100mm
Label
800dots
(1200dots)
1249mm
80mm
9992dots
(14988dots)
100mm
800dots
(1200dots)
600mm
4800dots
(7200dots)
333