SATO CL4NX Programming Reference Manual page 499

Parameters related to read after authentication of user block and subtraction register (omissible)
aar: Read after
authentication of
user block
Parameters related to write after authentication of user block and subtraction register (omissible)
aaw: Write after
authentication of
user block
Parameters related to write (MAC inclusive) of user block and subtraction register (omissible)
mac: Write (MAC
inclusive) of user
block
Parameters related to system block lock (omissible)
Note that once you lock the blocks, the locked blocks become read-only
and you cannot unlock them.
Note: can be used only for FeliCa Lite-S.
Set a fixed 15-digit binary.
The bitmap image corresponds to the 14 scratch pad blocks (00H ~
0DH) and 1 subtraction block (0EH), and the block sequence is 00H
~ 0EH from the left.
0 1 ･･････････
If this parameter is specified, read after authentication can be
performed for the block specified to 1. Specify the block that does
not require read after authentication to 0.
Note that once you set to 1, the block cannot be set back to 0.
Note: can be used only for FeliCa Lite-S.
Set a fixed 15-digit binary.
The bitmap image corresponds to the 14 scratch pad blocks (00H ~
0DH) and 1 subtraction block (0EH), and the block sequence is 00H
~ 0EH from the left.
0 1 ･･････････
If this parameter is specified, write after authentication can be
performed for the block specified to 1. Specify the block to 0 when
authentication is not required for write.
Note that once you set to 1, the block cannot be set back to 0.
Note: can be used only for FeliCa Lite-S.
Set a fixed 15-digit binary.
The bitmap image corresponds to the 14 scratch pad blocks (00H ~
0DH) and 1 subtraction block (0EH), and the block sequence is 00H
~ 0EH from the left.
0 1 ･･････････
497
D E
Subtraction block (1 digit)
Scratch pad block (14 digits)
D E
Subtraction block (1 digit)
Scratch pad block (14 digits)
D E
Subtraction block (1 digit)
Scratch pad block (14 digits)