SATO CL4NX Programming Reference Manual page 160

[Notes]
• With the highlighting function, the character width enlarges proportional with the expansion
factor.
• Using the highlighting function, depending on the type of font, characters become squeezed.
• This command is not available for JIS code print data.
• For the half size character specification (1-byte character code), printing will be performed in
W12 x H24 dots.
• For the full size character specification (2-byte character code), printing will be performed in
W24 x H24 dots.
[Attention]
• When half-sized character with voiced/P-sound consonant mark is specified, each part of
character appears as a single character.
e.g.) When the word "ﾊﾞｰ" is specified, it will be written separately such as " ﾊ ", " ﾞ ", " ｰ ".
[Valid Commands]
Print position <V>
Modification <P>
Parent topic Font command
<H>
<L> <%> <&>
158
</> <0> <WD>