SATO CL4NX Programming Reference Manual page 172

[Supplemental explanation]
• Registering 24 x 24 dots external fonts in the internal memory or user registration memory.
• The code to specify in the registration font code address needs to match the Kanji set (<KS>)
and Kanji code (<KC>).
• Overwriting registration data is available.
• The order of data output is as follows.
• The data registered in the printer memory will be deleted at the power off. In this case, you need
to register the data again.
External character file [24×24]
D1 D2
D4 D5
D7 D8
D70 D71
When registering the external characters described above, D1 data becomes <00>
becomes <3C>
of [00111100] and D3 consists of [00000000].
In the same manner, D4 becomes <00>
the external registration data are specified to <003C00003C00...>
[Point]
• The data registered in the user registration memory will be maintained after the power is off.
• You cannot use the internal memory in combination with the user registration memory.
• Specify the slot to register.
If <CC> command is not sent after the power on, the data are registered in the internal memory.
Parent topic Font command
D3
8 dots
D6
D9
D1
D4
D7
D72
D10
D13
D16
D19
D22
D25
D28
D31
D34
D37
D40
D43
D46
D49
D52
D55
D58
D61
D64
D67
D70
and D3 data becomes <00>
16
24 dots
8 dots
D2
D71
because D1 consists of [00000000], D2 consists
16
, D5 becomes <3C>
16
170
8 dots
D3
D6
D9
D12
D15
D18
D21
D24
D27
D30
D33
D36
D39
D42
D45
D48
D51
D54
D57
D60
D63
D66
D69
D72
16
and D6 becomes <00>
16
and up to D72.
16
24 dots
, D2 data
, and
16