[Esc+L] Enlargement - SATO CL4NX Programming Reference Manual

[ESC+L] Enlargement

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying the enlargement ratio of font.
[Format]
<L>aabb
• Parameter
a [Horizontal enlargement ratio] = Valid range: 01 to 36
b [Vertical enlargement ratio] = Valid range: 01 to 36
[Coding Example]
Horizontal enlargement ratio: 4 times, Vertical enlargement ratio: 3 times
<A>
<V>100<H>200<P>3<L>0403<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
• Enlarges the character pitch as well. When Character Pitch <P> is used at the same time, the
parameter value of horizontal enlargement ratio specified in Enlargement <L> will be reflected in
the subsequent specification <P>.
[Note]
• If increasing the enlargement ratio, design the print format that does not exceed printing area.
[Valid Commands]
Font <XU>
<K4>
<k4>
<WB>
Modification <P>
Graphic <G>
Memory card <GR>
Parent topic Modification Command
ESC
<1B>
16
aa=01, bb=01
When the power is OFF
Valid range within items
Valid range between items
<XS> <XM> <XB>
<K5> <K8> <K9>
<k5> <k8> <k9>
<WL> <X20> <X21>
<RF>
<GM> <GP>
<GC> <PY>
37
L
<4C>
16
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set parameter becomes initial value at the next item
<A>.
<XL> <OA> <OB>
<KA> <KB> <KD>
<kA> <kB> <kD>
<X22> <X23> <X24>
Parameter
aabb
<K1> <K2> <K3>
<k1> <k2> <k3>
<U> <S> <M>