[Esc+Tu] Printing Tag Data (Felica) (Cl4Nx Only) - SATO CL4NX Programming Reference Manual

[ESC+TU] Printing tag data (FeliCa) (CL4NX Only)

Command
Hexadecimal code
Initial Value
Valid range and term of
command
[Function]
Reads 16-digit hexadecimal numeric sequence from FeliCa Lite, FeliCa Lite-S tag and renders to the
specified direction to make it possible to print on label.
[Format]
<TU>a(,n ～ n)
• Parameters
a = To use this functionality or not
1： Read IDm data and start using
0： Cancel use
n = ID that is converted to IDm in the data area of each command for the ID in use (only when a=1).
Character size: 4-16 bytes
Character type: Any (alphanumeric)
(All parameters should be in the ASCII format)
【Coding Sample】
A sample using SATO as ID
<A>
<RK>4,D0,,df2:FFE0
<TU>1, SATO
<%>0
<V>0410
<H>0090
<P>00
<L>0101
<%>0
<V>0410
<H>0090
<P>00
<XM>SATO
<%>0
<V>0060
<H>0040
<D>102120*SATO*
<%>0
<V>0195
<H>0055
<P>00
<L>0101
<XM>*SATO*
<%>1
ESC
<1B>
16
Nil
When turning off the power
Valid range within item
Valid range between items
505
TU
<54> <55>
16 16
The set command is not maintained.
The set parameter is in effect until a new specification is
made.
The set parameter becomes invalid.
Parameter
a(,n ～ n)