SATO CL4NX Programming Reference Manual page 330

[Print darkness level range]
Initial value
5
[Print darkness range]
Initial value
A
Parent topic System Command
Parameter valid range
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Parameter valid range
A
When setting outside of valid range
Command error will occur when other values than parameter
valid range in the left is specified.
When setting outside of valid range
From B to F are reserved. The same darkness as A.
Print darkness other than from A to F will be replaced with A.
(It will not be a command error.)
328