[Supplementary Explanation]
•
UCC128 code is exclusive to Standard Carton ID. When printing in EAN128, designed for the
markets in the medical, fresh food, or flowers and plants, use CODE128 Barcode <BG> to
specify print data with application identification or separator that matches each specification.
•
Start character code, function character, end character code, and identification code
(corresponds to [00] only) are added automatically.
•
Modulus 10 check character and modulus 103 check character are automatically generated.
•
Sequential number of barcode data is available.
•
Line pitch between barcode and expository font is fixed at 10 dots.
•
If the width of expository font is wider than that of barcode, it starts printing from the print start
position of barcode.
•
If the width of expository font is narrower than that of barcode, expository font will be aligned to
the center of barcode for printing.
•
Prints expository font in OCR-B.
•
If expository font is outside of printing area, it will not be printed. When selecting [HRI is
available], specify Vertical Print Position <V> and Horizontal Print Position <H> in consideration
of print of expository font.
•
If the bar code commentary font specification to specify other than 0, 1, 2, operation is the same
as the bar code commentary font specified 0.
205