[Esc+Tu] Printing Tag Data (Iso/Iec14443 Typea) (Cl4Nx Only) - SATO CL4NX Programming Reference Manual

[ESC+TU] Printing tag data (ISO/IEC14443 TypeA) (CL4NX
Only)
Command
Hexadecimal code
Initial Value
Valid range and term of
command
[Function]
Reads UID data from NTAG or MIFARE tag and develops to specified direction to make it possible to
print on label.
[Format]
<TU>a(,n ～ n)
• Parameters
a = To use this functionality or not
2: Read UID data and start using (Declare the 14-digit UID by using the 2.)
0: Cancel use
n = ID that is converted to UID in the data area of each command for the ID in use
(only when a=1).
Character size: 4-16 bytes
Character type: Any (alphanumeric)
(All parameters should be in the ASCII format)
[Coding Sample]
A sample using SATO as ID.
<A>
<RK>4,D0,,df2:FFE0
<TU>2,SATO
<%>0
<V>0410
<H>0090
<P>00
<L>0101
<XM>SATO
<%>0
<V>0060
<H>0040
<D>102120*SATO*
<%>0
<V>0195
<H>0055
<P>00
<L>0101
<XM>*SATO*
<%>1
<V>0595
<H>0520
ESC
<1B>
16
Nil
When turning off the power
Valid range within item
Valid range between items
484
TU
<54> <55>
16 16
The set command is not maintained.
The set parameter is in effect until a new specification is
made.
The set parameter becomes invalid.
Parameter
a(,n ～ n)