SATO CL4NX Programming Reference Manual page 637

[Usage example]
(1) STX SOH CAN 00001 ETX
(2) STX SOH CAN ***** ETX
[Supplementary explanation]
• Please do not use this command while sending other data like print data etc.
• Please note that there is no return data for this command. Host will send item acquiring
command (SOH+ENQ) so please check the result by checking the return status.
5) Print stop request command
This command stops printing operation.
[Command]
SOH(HEX 01H) + DLE(HEX 10H)
[Format]
STX + SOH + DLE + ETX
[Usage example]
STX SOH DLE ETX
[Supplementary explanation]
• Please do not use this command while sending other data like print data etc.
• Please note that there is no return data for this command. Host will send item acquiring
command (SOH+ENQ) so please check the result by checking the return status.
6) Print start request command
This command cancels print operation in hold, which was stopped by print stop command (SOH
+DLE), then resume printing operation.
[Command]
SOH(HEX 01H) + DC1(HEX 11H)
[Format]
STX + SOH + DC1 + ETX
[Usage example]
STX SOH DC1 ETX
[Supplementary explanation]
• Please do not use this command while sending other data like print data etc.
635