[Esc+Vb] Barcode Checker - SATO CL4NX Programming Reference Manual

[ESC+VB] Barcode Checker

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
A control command for barcode checker.
[Format]
<VB>a,b,c,d,e,f,g
• Parameter
a [Mode]
0: Disabled
1: Readable
2: Comparison
* When "Disabled" is specified, all the subsequent parameters will not function.
b [Start Position]
10 to 20000 dots (203 dpi)
15 to 18000 dots (305 dpi)
30 to 9600 dots (609 dpi)
c [VOID print]
0: Disabled
1: Enabled
d [Retry Count]
0 to 10
* When the "VOID print" is set to "Disabled", this parameter will not function.
e [Host Notification]
0: Disabled
1: Enabled
f [Specify the number of barcode]
0: Command (the number of barcode command)
1: Setting
* The parameter functions only when the "mode" is set "Readable".
g [the number of barcode]
1 to 10: the number of barcode to read
* When "Specify the number of barcode" is set to "Command", this parameter will not function.
*1 When the non-functional parameter is specified, it will be set although it will not function.
[Coding Example]
Mode: Disabled (all the subsequent parameters are omitted.)
<A>
<VB>0,,,,,,
<Z>
[Coding Example 2]
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between items
364
VB
<56> <42>
16 16
The set parameter is maintained.
The set parameter is valid until next specification is
made.
The set parameter is valid until next specification is
made.
*1
Parameter
a,b,c,d,e,f,g
*1
*1
*1