Timing chart
1) Normal process
Power On
Printer
Initializing
ENQ
RD
SD
Printer Status
2) Cancel process
Printer
RD
SD
Printer Status
STX...ETX (1)
ENQ
Status
Status
Receive/Analysis/Edit (1)
Printing (1)
The format of ENQ will be STX SOH ENQ "*****" ETX. (***** will be any item No. )
Avoid ENQ transmission while sending the print data (STX ESC+"A" - ESC+"Z" ETX).
By sending ENQ, the status may not be returned or there may be print error.
STX..ETX (1)
Status
Status
Receive/Analysis/Edit (1)
Printing (1)
The format of CAN will be STX SOH CAN "*****" ETX. (***** will be any item No. )
After sending CAN, please wait about 500 msec before sending the next data.
Avoid sending CAN while sending the print data (STX <A> - <Z> ETX).
With the above condition, the job may not be canceled or the item may not be printed correctly.
Buffer near full state
STX...ETX (2)
ENQ
Online
Receive/Analysis/Edit (2)
500 msec
Online
656
Press the LINE button
Buffer near full release
STX...ETX (3)
ENQ
Status
Status
Receive/Analysis/Edit (3)
Printing (2)
STX..ETX (2)
Status
ENQ
Press the LINE button
ENQ
Status
Offline
Status
Printing (2)