SATO CL4NX Programming Reference Manual page 484

Block 0
Data
[Coding sample8] (data format set to ASCII)
When writing 13-byte characters "4912345678904" to NTAG213 RFID tag, locking 4 continuous
blocks simultaneously with "Ignore RFID tag error" omitted
<A>
<V>50<H>50<BD>3020654912345678904
<RK>1,D13,4912345678904,lck:F000
<Q>2
<Z>
Memory data after execution
Block 0 1
Data
[Coding sample9] (data format set to ASCII)
In case where 13 bytes characters of [4912345678904] is recorded to RFID tag of NTAG215 from a
block of user memory 12 and target block is locked simultaneously (lock L and BL at the same time),
with "Ignore RFID tag error" omitted
<A>
<V>50<H>50<BD>3020654912345678904
<RK>1,D13,4912345678904,ict:04,wsb:12,dlk:010001
<Q>2
<Z>
Memory data after execution
0 1
Block
Data
[Supplemental explanation]
• This command allows to print for continuous printing, cutter printing, dispenser printing and tear-
off.
1 2 3 4.....8
4912
specify the block to start writing with wsb:
Refer to "ISO/IEC14443 Type A memory structure"
2 3 4 5
4912 3456
Specify lock block with lck:
Locked block
specify the block to start writing with wsb:
Refer to "ISO/IEC14443 Type A memory structure"
2 3 4...15 16 17
4912 3456
Becomes Read only with dlk:
9 10 11
3456 7890
6 7
Any data outside of the range written
7890 4XXX
to is not affected.
* XXX is data present before this
command was set.
18 19 20...31
7890 4XXX
482
12 13.....15
Any data outside of the range written
4XXX
to is not affected.
* XXX is data present before this
command was set.
8.....38 39
32...47 48.....129
Data in the byte
position outside for
writing is
maintained.
*XXX is the data existed before the write.
dlk: disables Read only
40
130 131 132 133 134