[Esc+K2] 24 X 24 Dots Kanji In Horizontal Line - SATO CL4NX Programming Reference Manual

[ESC+K2] 24 x 24 dots Kanji in horizontal line

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
Specifying 24 x 24 (width x height) dots horizontal written Kanji character print.
[Format]
<K2>an...n
• Parameter
a [Kanji selection mode]
H: HEX characters
B: Binary code
I: HEX characters, smoothing function
C: Binary code, smoothing function
J: HEX characters, highlighting function
D: Binary code, highlighting function
K: HEX characters, smoothing and highlighting function
E: Binary code, smoothing and highlighting function
n [Data] = Print data. For the available character codes, refer to Kanji code (ESC+KC) command.
[Coding example 1]
Shift JIS HEX characters, Horizontal enlargement ratio: 3, Vertical enlargement ratio: 5
<A>
<KC>1
<V>100<H>200<P>2<L>0305
<K2>H81698A94816A83548367815B
<Q>2
<Z>
[Coding example 2]
JIS binary code, Horizontal enlargement ratio: 2, Vertical enlargement ratio: 3
<A>
<KC>0
<V>100<H>100<P>2<L>0203
<K2>B!J3T!K%5%H!<
<Q>2
<Z>
[Supplementary Explanation]
• HEX characters = Kanji Code 4 bytes ASCII / 1 Kanji character (Ex.Shift JIS code)
• Binary code = Kanji Code 2 bytes / 1 Kanji character (Ex.Shift JIS code)
• Smoothing function validity range = Horizontal/vertical valid range: factor 3 to 12
ESC
<1B>
16
Nil
When the power is OFF
Valid range within items
Valid range between items
127
K2
<4B> <32>
16 16
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
Parameter
an...n