SATO CL4NX Programming Reference Manual page 429

[Valid command]
Modification <V>
command
[Supplemental explanation]
• The specification of coordinates <V><H>, rotation <%>, and magnification <L> is enabled.
• To perform magnification <L>, the command must be specified immediately before the trade
mark print command <TM>.
• The image size of trade mark is (Image 1: W143 x H101 dots, Image 2: 202 x H101 dots) (when
magnification is not specified).
Parent topic RFID Command (CL4NX Only)
<H> <L> <%>
427