SATO CL4NX Programming Reference Manual page 390

[Supplementary Explanation]
• Specify the card slot number used for Card Slot <CC> prior to this command.
• Specify registered data only.
• To change the registered content, clear it with Clear <*> to re-register.
• Graphic Call <GR> is for printing out the data registered with Registration of Graphic <GI>.
• When data is not registered properly, print error may occur.
For details of data format, refer to Print of Graphic <G>.
• The error occurs when specifying unused or specifying the slot which this product is allocated.
[Note]
• Do not turn the printer's power off when accessing to the memory. When the printer power is off
while memory accessing, the data in the accessed media may be corrupted.
[Specified Range]
Model
CL4NX
CL6NX
*1 Valid range when "Head Base Position" is set to "Standard".
*2 Valid range when "Head Base Position" is set to "Left-justify".
Parent topic Memory Card Command
Head density
203 dpi
305 dpi
609 dpi
203 dpi
305 dpi
Maximum byte in
horizontal direction
104
156
312
*1
152
*2
167
*1
248
*2
251
388
Maximum byte in
vertical direction
400
600
999
400
600