[Esc+/R] Remove Print Template - SATO CL4NX Programming Reference Manual

[ESC+/R] Remove Print Template

Hexadecimal code
Initial value
Valid range and term of
command
[Function]
To clear content registered XML print template inside printer memory.
[Format]
</R>,a,n~n
• Parameter
a [Remover template]
0 : Represent by print template name
1 : Represent by print template format number
n~n [Print template name or format number]
Valid range (Template name) : 1 to 32 ASCII characters
Valid range (Format number) : 001 to 999
[Coding Example]
Clear Print Template with the template name "SATO Barcode".
<A>
<CC>1
</R>,0,SATO Barcode
<Z>
[Supplementary Explanation]
• To avoid incorrect response from printer, this command should not use in conjunction with other
commands.
• This command is valid only when the desired template is registered inside the printer memory
initially.
• When parameter (n~n) is not inserted or inserted wrong reference name, this </R> command
will become invalid and the command is not effected.
• Parameter 'a' will be set as '0' if not assigned.
• Printer will return "ACK" back to host PC if operation success, else printer will return "NAK" to
the host PC if operation fail.
Parent topic XML Command
ESC /R
<1B> <2F>
16
a = 0
When the power is OFF
Valid range within items
Valid range between items
Parameter
< 52> ,a,n~n
16 16
The set parameter is maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
514