Timing Chart Of Multiple Receive - SATO CL4NX Programming Reference Manual

Timing chart of multiple receive

1) Normal process
Power On
Printer
Initializing
SD
RD
Printer Status
2) Error process
Head open
Printer
SD
STX..................ETX (1)
RD
Printer Status
* When the paper end error occurs, open the head, set label, close the head and feed.
Note: (1) The paper end error will be released when the head is closed.
(2) XOFF will be sent when data is received during an error.
500 msec
STX.ETX (1)
Recei v e/Analysis/Edi t (1)
Note:In this protocol, polling is performed for "ON" during the interval of 500 msec from the start of power supply up to reception of
first data item.
Head close
Press the LINE button
Offline
Receive/Analysis/Edit (1)
Receive buffer near full state Receive buffer near full release
STX.ETX (2)
Online
Recei v e/Analysis/Edi t (2)
Printing (1)
Paper end error
STX......ETX (2)
Online
Receive/Analysis/Edit (2)
Printing (1)
654
Press the LINE button Press the LINE button
STX.ETX (3)
STX......ETX (4)
Offline
Recei v e/Analysis/Edi t (3) Receive/Analysis/Edit (4)
Printing (2)
Press the LINE button
Offline
*
Printing (3)
Printing (1)