SATO CL4NX Programming Reference Manual page 401

Hide thumbs Also See for CL4NX:

Table of Contents

[Supplementary Explanation]

Overwriting registration data is available.

Specify slot registered with Card Slot for Use <CC> prior to this command <T2> by all means.

The code to specify in the registration font code address needs to match the Kanji set (<KS>)

and Kanji code (<KC>).

When use <T2> with another registration command, it may occur error because of capacity

shortage of the memory card.

In this case, register another command in another memory card, or use a memory card having

bigger capacity.

Data output is as follows.

External file [24x24]

When registering the external characters described above, D1 data becomes <00>

becomes <3C>

of [00111100] and D3 consists of [00000000].

In the same manner, D4 becomes <00>

the external registration data are specified to <003C00003C00...> and up to D72.

Do not turn the printer's power off when accessing to the memory. When the printer power is off

while memory accessing, the data in the accessed media may be corrupted.

Parent topic

Memory Card Command

and D3 data becomes <00>

because D1 consists of [00000000], D2 consists

, D5 becomes <3C>

and D6 becomes <00>

Show Quick Links

Table of Contents