[Dc2+Pj] Epc Code Read (Uhf M6E) (Cl4Nx Only) - SATO CL4NX Programming Reference Manual

[DC2+PJ] EPC code read (UHF M6e) (CL4NX Only)

Command
Hexadecimal code
Initial value
Valid range and term of command
[Function]
Read the information of Gen2 (Class1Generation2) corresponding tags and IC chip manufacturer
extended specifications tag (UHF).
[Format]
[DC2]PJ,aa(,aa)(,aa)(,aa),bb
[Parameters]
Symbol
a Identifier
b Options identifier
[Return data format (normal)]
[STX]a...a,b...b(,c...c)[ETX]
[Return data]
Symbol
a Total number of data byte
* This is the total number of bytes after
parameter b. The delimiting comma between
parameters a and b, and the ETX are not
included.
b Memory data
DC2
<12>
16
None
When turning off the power
Valid range
Printer operation in progress
When acquiring label sensor
information
Error
Parameter name
U1: EPC area
U2: TID area
U3: USER area
U4: PC/AFI area
NO: No option identifier
RS: RSSI/ RSSI(Received Signal Strength
Indicator)
MT: Module temperature
Parameter name
PJ
<50> <4A>
16 16
Valid range
Data size from the first memory data item until
before [ETX]
Maximum 3 digits
During a tag error, "EPC_Tag_Err" is set.
562
Parameter
,aa,bb
-
-
The command cannot be received
during the printer operation. ([NAK]
return)
Commands are not accepted while
acquiring sensor information. ([NAK]
reply)
Commands can be received even if
an error is occurring.
Acquisition method
Two characters fixed
acquisition
* More than 1 can be
specified
Two characters fixed
acquisition
Only for UHF
Valid range