SATO CL4NX Programming Reference Manual page 512

[STX]70,1,N,DM:03FEFFE0536C92A8･･････ [CR][LF][ETX]
• Write successful (IDm read fail)
[STX]9,1,I,DM:[CR][LF][ETX]
• Write fail (IDm read failed)
[STX]9,0,I,ID:[CR][LF][ETX]
[Supplemental explanation]
• The write status and IDm is returned when [DC2]PK is received after RFID write.
• Although write is successful status will be returned without data if you fail to read IDm since IDm
read will be done separately from write.
• Return data remains the same when code write is specified without print data. Previous value
will be returned.
<RU>,01 return sequence (for a tag having the IDm of 03FEFFE0536C92A8）
<RU>,01 *1
Return based on [DC2]PK
<RK>4,D13,4912345678904
Write command
[DC2]PK
*1 Most common commands such as <A>, <Z> are not described in the above diagram.
*2 The content of the return IDm is an example. The actual value varies depending on the tag.
[Supplemental explanation]
Host
510
Printer
The settings of return based on [DC2]PK are
retained
Enabled until power is turned OFF
Acquire IDm immediately after successful
write, and store it in the memory with the
success status.
Return the write status (write success) and
IDm data
[STX]72,1,N,DM:03FEFFE0536C92A8･･････
[CR][LF][ETX] *2