[Supplementary Explanation]
•
Italic characters are tilt in an angle of 15-degree, within their specified width.
•
The outline font printing command <$=> shall be executed after the outline font design selection
<$>.
•
For the font design 1 thru 9, if the specified dot setting is irregularly small, the font cannot be
identified.
•
If the font width / height are very small, there can be cases that the font is squeezed.
[Valid Commands]
Font
<$=>
Outline Font Design
The print sample shown above is issued with a head density of 8 dots/mm.
Parent topic
Font command
106