In case where communication is lost while transferring status after
receiving print data
CRC check is enabled (Common in status 3 and status 4)
HOST
CONNECT
Note
•
When ACK is not returned after sending print data, it shall be regarded as communication failure
and sending print data has to be stopped.
•
ACK may not return when communication through Bluetooth is disconnected before this product
returns ACK.
CRC check is disabled (Common in status3 and status 4)
Works the same as the previously mentioned "CRC check enabled".
Parent topic
Transmission sequence
Print command (STX to ETX CRC)
ID number=[12]
Print Qty=50
Job name=[SATO]
ACK
X X
Disconnection
or communication failure
This product
Receiving/Analysis/Editing
Print
724