SATO CL4NX Programming Reference Manual page 190

[Coding Example]
Barcode type: JAN/EAN13, Narrow bar width: 03, Barcode height: 120, Barcode data:
4902471000793, Character type: XU, HRI data: 4902471000793
<A>
<V>100<H>200<D>3031204902471000793
<XU>4902471000793
<Q>2
<Z>
[Supplementary Explanation]
• Adds HRI characters with specified font.
• When the data other than specified value is set, printing will not be performed. When barcode
enlargement ratio is small and character type is large, HRI text may be overlapped with each
other.
• Printer will lay out HRI properly.
• HRI for JAN/EAN8, JAN/EAN13, UPC-A will be printed properly in the conditions below.
For 203 dpi (8 dots/mm) : Appropriate Narrow bar width is [02], [03]
For 305 dpi (12 dots/mm) : Appropriate Narrow bar width is [03], [04]
For 609 dpi (24 dots/mm) : Appropriate Narrow bar width is [06], [07] ,[08]
• HRI will not be printed when barcode is error for barcode with HRI.
• When specifying <P> and <L>, (<P>02<d>n...n, <L><d>n...n), HRI characters are not printed.
Parent topic Barcode Command
188