SATO CL4NX Programming Reference Manual page 182

1) To print with Parallel 1 and Parallel 2, specify enlargement ratio of bar width so that narrow bar
gets at least 2 dots. ("L" indicates the enlargement ratio to the bar width ratio.)
Bar width ratio 1:2
Bar width ratio 1:3
Bar width ratio 2:5
UPC-A/EAN/JAN
2) If printing in serial 1 or serial 2 mode, specify the bar width expansion factor so that when using a
8 dots/mm or 12 dots/mm head the width of the narrow bar is at least 3 dots.
Bar width ratio 1:2
Bar width ratio 1:3
Bar width ratio 2:5
UPC-A/EAN/JAN
3) If printing in serial 1 or serial 2, reduce the print speed.
(7) Printing barcode exceeding the area of media size (<A1>)
When printing barcode or HRI exceeding the area of media size (<A1>), the barcode and HRI inside
the media will be printed.
Example of printing UPC-A (with HRI) exceeding the area of media size
Barcode (Ratio 1:3) [ESC+B]
[ESC+D] Barcode (Ratio 1:2)
Barcode (with HRI) [ESC+D] ~ [ESC+d]
[ESC+BD] Barcode (Ratio 2:5)
Barcode Ratio Registration [ESC+BT]
Barcode print by specified ratio [ESC+BW]
[ESC+BC] CODE 93 Barcode
[ESC+BF] UPC Add-on (Bookland)
Code 128 Barcode [ESC+BG]
GS1-128 (UCC/EAN128) (Standard Carton ID Only) [ESC+BI]
[ESC+BP] Postnet
[ESC+BS] USPS Barcode
Composite symbol [ESC+EU]
[ESC+BL] UPC-A Barcode (Without HRl)
[ESC+BL] ~ [ESC+d] UPC-A Barcode (Specifying HRl)
UPC-A Barcode (With HRI) [ESC+BM]
Parent topic Part 1 SBPL Commands
8 dots/mm
2L or more
2L or more
1L or more
2L or more
8 dots/mm
3L or more
3L or more
2L or more
3L or more
Media size area
Printing of barcode and HRI.
180
Head density
12 dots/mm
2L or more
2L or more
1L or more
2L or more
Head density
12 dots/mm
3L or more
3L or more
2L or more
3L or more
24 dots/mm
4L or more
4L or more
2L or more
4L or more
24 dots/mm
6L or more
6L or more
4L or more
6L or more