SATO CL4NX Programming Reference Manual page 24

Command
<U> U font (Basic size 5×9 dots)
<S> S font (Basic size 8×15 dots)
<M> M font (Basic size 13×20 dots)
<WB> WB font (Basic size 18×30 dots)
<WL> WL font (Basic size 28×52 dots)
<$=> Outline Font Print
<RD> CG font
<RG> Multiple language
<RH> Scalable font
Parent topic Font list
Limitation on non-standard codes
Non-standard codes are available only in its default setting (Refer to the following chart). If control
code is set to the same code as high-order bytes of Kanji by changing the code intentionally, it is not
possible to use half-size characters which correspond to control code.
Functionality
Protocol code
Parent topic Font list
Command name
Description
STX
ETX
ESC
ENQ
CAN
The range of Eurocode
Eurocode shall be 00H-FFH considering
the use of GID (Glyph Index).
Eurocode shall be 20H-FFH because
the range of character code is more than
20H.
Note: A space will be printed in case if less
than 20H is specified.
Eurocode shall be 00H-FFH considering
the use of GID (Glyph Index).
Standard
02H
03H
1BH
05H
18H
22
Code Page
DOS 866
DOS 858
DOS 857
DOS 858
Initial value
Non-standard
7BH
7DH
5EH
40H
21H