SATO CL4NX Programming Reference Manual page 565

Symbol
*Text format
c Option data
("Option identifier" + ":" + "Data")
*Text format
[Return data format (when a command error occurs)]
[NAK]<15>
16
[Exception processing]
Parameter name
Identifier
Terminology
Command error
[Coding sample1]
[DC2]PJ,U1,NO (Specify EPC area)
[Coding sample2]
[DC2]PJ,U2,RS (Specify RSSI to TID area readout and option)
[Coding Sample 3]
[DC2]PJ,U1,U2,NO (Specifies EPC and TID area read)
[DC2]PJ,U3,U4,MT (Reads USER and PC/AFI area and specifies module temperature to option)
[Return status/ Format]
cc:d...d(,cc:d...d)
Symbol
c
d
Parameter name
Command error
The data received after a command error is determined is not considered as a
parameter of this command.
Name of Parameter
Identifier
Data
Maximum 256 digits
Options identifier
RS: RSSI (Received Signal Strength Indicator)
MT: Module temperature
Data
Maximum 3 digits
Exception condition
A value outside the range is specified
Description
EP: EPC area
TI: TID area
UD: USER area
PC: PC/AFI area
563
Valid range
Description