Command Font Settings And Usage Example - SATO CL4NX Plus Driver Manual

3.2.2

Command Font Settings and Usage Example

Command font is a virtual font for directly sending commands to the product. You can use features
that are not directly supported by the printer driver. Knowledge of SATO Barcode Printer Language
(SBPL) command is necessary to use command font. For details on SBPL commands, refer to
"CL4NX Plus Programming Reference."
[Name]
Set the name of the command font that you want to register.
This name is shown on the font list in the application.
[Description]
You can enter a description of the command font to be registered.
[Prefix] [Suffix]
Specify how the text is to be supplied. The specified text can be appended to the front or the end
of a command.
[No prefix]: A prefix is not used.
[No suffix]: A suffix is not used.
[File]: Prefixes and suffixes are loaded from an external file and appended to the data.
[Parsed file]:
Prefixes and suffixes are loaded from an external file and appended to the data. Reserved
variables can be included and are converted to data during printing.
[Text]: Prefixes and suffixes are appended directly as text.
[Parsed text]:
Prefixes and suffixes are appended directly as text. Reserved variables can be included and
are converted to data during printing.
58