Command Font Settings And Use Example - SATO FX3-LX Driver Manual

Hide thumbs Also See for FX3-LX:

Table of Contents

3.2.2

Command font settings and use example

Command font is virtual font for directly sending commands to the printer. You can use features that

are not directly supported by the printer driver. Knowledge of Sato Barcode Printer Language (SBPL)

command is necessary to use command font. For details of SBPL commands, refer to "FX3-LX

Programming Reference."

[Name]

Set the name of the command font that you want to register.

This name is displayed on the font list in the application.

[Description]

You can enter a description of the command font to be registered.

[Prefix] [Suffix]

Specify how the text is to be supplied. The specified text can be appended to the front or the end

of a command.

[No prefix]: A prefix is not used.

[No suffix]: A suffix is not used.

[Text]: Prefixes and suffixes are appended directly as text.

[Parsed text]:

Prefixes and suffixes are appended directly as text. Reserved variables can be included and

are converted to data during printing.

[File]: Prefixes and suffixes are loaded from an external file and appended to the data.

[Parsed file]:

Prefixes and suffixes are loaded from an external file and appended to the data. Reserved

variables can be included and are converted to data during printing.

Table of Contents