Esc+2D50 Datamatrix (Ecc200) - SATO WS4 Series Programming Reference Manual

2D Code
Available for
WS4 series

ESC+2D50 Datamatrix (ECC200)

Datamatrix (ECC200)
ESC
Hex code
<1B>
16
Default setting None
When printer is powered off
Persistence of
Validity in a job
the command
Validity after a job
[Function]
Prints DataMatrix code (ECC200).
[Format] (Setting portion)
<2D50>,aa,bb,ccc,ddd
●Parameter
a [Cell width]
b [Cell height]
c [Number of cell per line]
d [Number of line per symbol] =
[Format] (Data portion)
<DN>mmmm,n~n
●Parameter
m Quantity of data
n Print data
[Coding Example] Cell width : 3 dots
<A>
<V>100<H>200<2D50>,03,03,000,000
<DN>0010,0123456789
<Z>
[Notes]
1. In case any other parameters than above are specified, or parameters and quantity of data are not consistent with each other,
the symbol will not be printed correctly.
2. Make sure to leave 2mm margin of each side of the symbol for good scanner-readability.
3. To specify the code address [7EH], write [7EH, 7EH]. Quantity of data is [0002].
Data format
2D50
<32> <44> <35> <30>
16 16 16 16
Set parameter will not be retained
Becomes invalid after execution
Becomes invalid after the job
= Valid range
= Valid range
= Valid range
Valid range
= Valid range : 1 to 3116
= Data
Cell height : 3 dots
Data format
Numeric
Alphanumeric
Binary (01H to FFH)
ESC+2D50
Parameter
,aa,bb,ccc,ddd
: 01 to 16 dots
: 01 to 16 dots
: 000 (fixed)
: 000 (fixed)
Quantity of data
3116
2335
1556
131