Holtek HT32F52220 User Manual page 162

32-Bit Arm ® Cortex ® -M0+ MCU
HT32F52220/HT32F52230
Bits Field
[1:0] ADMODE
Rev. 1.10
Descriptions
ADC Conversion Mode
ADMODE [1:0] Mode
00 One shot mode
01 Reserved
10 Continuous mode
11 Discontinuous mode
162 of 366
Descriptions
After a start trigger, the conversion will be
executed on the specific channels for the
whole conversion sequence once.
After a start trigger, the conversion will
be executed on the specific channels for
the whole sequence continuously until the
conversion mode is changed.
After a start trigger, the conversion will be
executed on the current subgroup. When
the last subgroup is finished, the conversion
will restart from the first subgroup if another
start trigger occurs.
November 09, 2018