Holtek HT32F52220 User Manual page 47

32-Bit Arm ® Cortex ® -M0+ MCU
HT32F52220/HT32F52230
Bits Field
[1] ITADF
[0] ORFF
Rev. 1.10
Descriptions
Invalid Target Address Flag
0: The target address is valid
1: The target address is invalid
The data in the TADR field must be in the range from 0x0000_0000 to 0x1FFF_
FFFF. Otherwise, an ITAD interrupt will occur if the ITADIEN bit in the OIER register
is set. Reset this bit by writing 1.
Operation Finished Flag
0: No flash operation is finished
1: Last Flash operation is finished
The ORF interrupt will occur if the ORFIEN bit in the OIER register is set. Reset this
bit by writing 1.
47 of 366 November 09, 2018