Control Panel Inverter Pcb - Canon imageRUNNER 2270 Service Manual

F-10-33
Points to Note When Replacing the DC
Controller PCB
Be sure to remove the boot ROM [1] from
the exiting DC controller PCB, and mount
it to the new DC controller PCB.
F-10-34
10.5.6 Control Panel Inverter
PCB
10.5.6.1 Removing the
Control Panel
Refer to procedure 10.5.3
10.5.6.2 Removing the
Control Panel Base
Cover
Refer to procedure 10.5.4.2
10.5.6.3 Removing the
Control Panel Inverter
PCB
1) Remove the control panel inverter PCB
[1]. (3 connectors [2], 4 screws [3])
F-10-35
Chapter 10
0007-6428
0007-6430
0007-6466
10-29