Parts Replacement Procedure; Pickup Roller; Removing The Cassette Pickup Roller; Cassette Paper Sensor - Canon iR1020 Series Service Manual

7.6 Parts Replacement Procedure

7.6.1 Pickup Roller

7.6.1.1 Removing the Cassette Pickup Roller

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
1) Remove the cassette.
2) Place the machine with the rear panel down. However, since the exhaust
duct projects about 16 mm from other area of the rear panel, insert stacks
of paper or the like under the rear panel so that the machine stands stably.
3) Turn the pickup roller a half-turn with one hand, release the hook [1] with
the other hand, and remove the cassette pickup roller [2].
[1]

7.6.2 Cassette Paper Sensor

7.6.2.1 Removing the Cassette Paper Sensor

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
F-7-6
[2]
F-7-7
1) Remove the drum unit and developing unit.
2) Remove the two shafts [1], and then remove the transfer guide [2].
0013-1218
3) Release the claw [1], and then detach the sensor cover [2].
4) Disconnect the connector [1], release the claw, and then remove the cas-
sette paper sensor [2].
0013-1221

7.6.3 Cassette Pickup Solenoid

7.6.3.1 Removing the Cassette Pickup Solenoid

iR1020J / iR1024J / iR1020 / iR1024 / iR1024A / iR1024N / iR1024F /
iR1024i / iR1024iF
[1]
[1]
[2]
F-7-8
[2]
F-7-9
[2] [1]
F-7-10
Chapter 7
[1]
0013-1222
7-7