Removing The Cassette Pickup Assembly; Removing The Retry Sensor; Cassette Paper Sensor; Removing The Lower-Left Cover - Canon iR2020 Series Service Manual

7.5.4.2 Removing the Cassette Pickup Assembly

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Detach the cassette rear cover. (2 screws)
2) Remove the five screws [1] and one screw with toothed washer [2].
3) Disconnect the three connectors [3], and then remove the cassette pickup
assembly [4].
Install the cassette pickup assembly with the ground plate [1] outside the
side plate.

7.5.4.3 Removing the Retry Sensor

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Disconnect the connector [1], and then remove the retry sensor [2].
[2]
[1]
F-7-22
[3]
[2]
[1]
[3]
[1]
[4]
F-7-23
F-7-24

7.5.5 Cassette Paper Sensor

0011-2937

7.5.5.1 Removing the Lower-left Cover

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Detach the lower-left cover [2] by opening the rear support [1] with a
slightly strong force applied in the direction of the arrow.

7.5.5.2 Removing the Cassette Pickup Assembly

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Detach the cassette rear cover. (2 screws)
2) Remove the five screws [1] and one screw with toothed washer [2].
3) Disconnect the three connectors [3], and then remove the cassette pickup
assembly [4].
0011-0664
Install the cassette pickup assembly with the ground plate [1] outside the
side plate.
Chapter 7
[1] [2]
F-7-25
[2]
[1]
F-7-26
[3]
[2]
[1]
[3]
[1]
[4]
F-7-27
0012-6066
0011-2938
7-11