13.1 Overview
You can configure the PMG2006-T20A to permit access to clients based on their MAC addresses in the
MAC Filter screen. This applies to wired and wireless connections. Every Ethernet device has a unique
MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six
pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses
of the devices to configure this screen.
13.2 The MAC Filter Screen
Use this screen to allow wireless and LAN clients access to the PMG2006-T20A. Click Security > MAC Filter.
The screen appears as shown.
Figure 67 Security > MAC Filter
C
PMG2006-T20A User's Guide
102
H A P T E R
MAC Filter
13