Ip Route Filter; Ip Prefix List - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Back button to return to the previous window.

IP Route Filter

IP Prefix List

This window is used to display and configure the IP route filter prefix list settings.
To view the following window, click L3 Features > IP Route Filter > IP Prefix List, as shown below:
The fields that can be configured are described below:
Parameter
List Name
Direction
Sequence ID
IP Network Address
Figure 6-234 ISIS Neighbors (Show Detail) Window
Figure 6-235 IP Prefix List Window
Description
Enter the IP prefix list name here. This name can be up to 32 characters long.
Select the direction for this rule here. Options to choose from are:
• Permit - Specifies that routes that match the rule entry are permitted.
• Deny - Specifies that routes that match the rule entry are denied.
Enter the sequence ID for this rule here. The range is from 1 to 65535.
Enter the starting and ending IPv4 addresses in the range used here.
384