D-Link DGS-3630 Series Reference Manual page 632

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in Ping Access Class are described below:
Parameter
ACL Name
Action
Click the Apply button to accept the changes made.
The fields that can be configured in IPv4 Ping are described below:
Parameter
VRF Name
Target IPv4 Address
Domain Name
Ping Times
Figure 15-21 Ping Window
Description
Enter the name of the ACL that will be used here. This name can be up to 32
characters long. Click the Please Select button to select an existing ACL from the
list.
Select the action to be taken here. Options to choose from are Add and Clear.
Description
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Select and enter an IP address to be pinged.
Select and enter the domain name of the system to discover.
Enter the number of times desired to attempt to Ping the IPv4 address configured
in this window. Users may enter a number of times between 1 and 255. Tick the
Infinite check box to keep sending ICMP Echo packets to the specified IP
address until the program is stopped.
620