D-Link DGS-3630 Series Reference Manual page 91

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
DHCPv6 Relay Interface ID Profile Settings
This window is used to display and configure the DHCPv6 relay interface ID profile settings. This is used to create a
new profile for the DHCPv6 relay Option 82.
To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Interface ID Profile
Settings, as shown below:
The fields that can be configured are described below:
Parameter
Profile Name
Format String
Description
string or a hexadecimal value.
○
: - Indicates the end of the formatted key sting. If a formatted key string
is the last parameter of the command, its ending character (":") can be
ignored. The space (0x20) between "%" and ":" will be ignored. Other
spaces will be encapsulated.
• ASCII strings can be any combination of formatted key strings and 0~9, a~z,
A~Z, !@#$%^&*()_+|-=\[]{};:'"/?.,<>`, and space characters. "\" is the escape
character. The special character after "\" is the character itself, for example,
"\%" is "%" itself, not the start indicator of a formatted key string. Spaces not
in the formatted key string will also be encapsulated.
• Hexadecimal values can be any combination of formatted key strings and
0~9, A~F, a~f, and space characters. The formatted key strings only support
keywords that support hexadecimal values. Spaces not in the formatted key
string will be ignored.
Figure 4-60 DHCPv6 Relay Interface ID Profile Settings Window
Description
Enter the profile name here. This string can be up to 32 characters long.
After clicking the Edit button, enter the Option 82 format string here. This string
can be up to 251 characters long.
The following rules need to be considered:
• This string can be a hexadecimal value, an ASCII string, or any combination
of hexadecimal values and ASCII characters. An ASCII string needs to be
enclosed with quotation marks ("") like "Ethernet". Any ASCII characters
outside of the quotation marks will be interpreted as hexadecimal values.
• A formatted key string is a string that should be translated before being
encapsulated in the packet. A formatted key string can be contained both
ASCII strings and hexadecimal values. For example, "%" +"$"+"1~32"+
79