IP Route Filter
IP Prefix List Settings
This window is used to create and configure an IP prefix list.
To view this window, click L3 Features > IP Route Filter > IP Prefix List Settings, as shown below:
The IP prefix list table parameters are described below:
Parameter
Prefix List Name
Prefix List Name
IP Address
Mask Address
Click Apply to implement changes made.
®
xStack
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 4- 152. IP Prefix List Settings window
Description
IP Prefix List Settings
Enter the name to identify the prefix list.
IP Prefix List Counter Clear
Enter the name of the prefix list that will be cleared.
Enter the IP address to be cleared.
Enter the mask address to be cleared.
294