Auto Surveillance Vlan - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
The fields that can be configured in Find Super VLAN are described below:
Parameter
Super VID
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the available entries.
Click the Delete button to remove the specific entry or to remove the sub-VLAN from the super VLAN.
Click the IP Range List
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the IP Range List
The fields that can be configured are described below:
Parameter
Action
Start IP Address
End IP Address
Click the Back button to return to the previous page.
Click the Apply button to accept the changes made.

Auto Surveillance VLAN

Auto Surveillance Properties
This window is used to display and configure the auto surveillance VLAN properties.
To view the following window, click L2 Features > VLAN > Auto Surveillance VLAN > Auto Surveillance
Properties, as shown below:
Description
Enter the super VLAN ID that will be displayed here. The range is from 1 to 4094.
link to add an IP range to the sub-VLAN.
link, the following page will be available.
Figure 5-32 Super VLAN (IP Range List) Window
Description
Select the action that will be taken here. Options to choose from are Add and
Remove.
Enter the starting IP address in the range of this sub-VLAN here.
Enter the ending IP address in the range of this sub-VLAN here.
141