Vlan; 802.1Q Vlan - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made for each individual section.
After selecting the MAC Notification History tab, at the top of the page, the following page will be available.
On this page, a list of MAC notification messages will be displayed.

VLAN

802.1Q VLAN

This window is used to display and configure the VLAN settings on this Switch.
To view the following window, click L2 Features > VLAN > 802.1Q VLAN, as shown below:
The fields that can be configured in 802.1Q VLAN are described below:
Parameter
VID List
Click the Apply button to create a new 802.1Q VLAN.
Click the Delete button to remove the 802.1Q VLAN specified.
The fields that can be configured in Find VLAN are described below:
Parameter
VID
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to locate all the entries.
Click the Edit button to re-configure the specific entry.
Figure 5-8 MAC Notification (MAC Notification History) Window
Figure 5-9 802.1Q VLAN Window
Description
Enter the VLAN ID list that will be created here.
Description
Enter the VLAN ID that will be displayed here.
125