Dns Name Server Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
IP DNS Lookup Static State
IP DNS Lookup Cache State
IP Domain Lookup
IP Name Server Timeout
IP DNS Server
Click the Apply button to accept the changes made.
The fields that can be configured in IP Domain Lookup Source Interface are described below:
Parameter
Source Interface State
Interface Type
VID
Click the Apply button to accept the changes made.

DNS Name Server Settings

This window is used to display and configure the IP address of a domain name server.
To view the following window, click Management > DNS > DNS Name Server Settings, as shown below:
The fields that can be configured are described below:
Parameter
VRF Name
Name Server IPv4
Name Server IPv6
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Description
Select to enable or disable the IP DNS lookup static state here.
Select to enable or disable the IP DNS lookup cache state here.
Select to enable or disable the IP domain lookup state here.
Enter the maximum time to wait for a response from a specified name server. This
value is between 1 and 60 seconds.
Select to globally enable or disable the DNS server feature here.
Description
Select to enable or disable the source interface state here.
Select the source interface type here. Options to choose from are Loopback,
Mgmt, and VLAN.
Enter the VLAN ID of the source interface here.
Figure 4-67 DNS Name Server Settings Window
Description
Enter the name of the VRF instance here. This name can be up to 12 characters
long.
Select and enter the IPv4 address of the DNS server.
Select and enter the IPv6 address of the DNS server.
85