D-Link DGS-3630 Series Reference Manual page 262

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Select the VRF entry and click the OK button to use the selected VRF entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
The fields that can be configured are described below:
Parameter
OSPF State
Router ID
Default Metric
Type
Distance
State
Originate
Metric
ECMP
Click the Apply button to accept the changes made.
After clicking the Show Detail button, the following page will appear.
Figure 6-50 OSPFv2 Process Settings (Edit) Window
Description
Select to enable or disable the OSPFv2 state on the specified VRF instance.
Enter the router ID in the IPv4 address format here. The router ID is a 32-bit
number assigned to each router running the OSPF protocol. This number
uniquely identifies the router within an AS. Each router has a unique router ID. If
the router is already active when this command is configured, the new router ID
will not take effect immediately. It is applied on the next reload or manual restart
of the OSPF process.
Enter the default metric value used here. The range is from 1 to 16777214.
Select the distance setting type here. Options to choose from are Intra-Area,
Inter-Area, External-1, and External-2.
• Inter-Area - Specifies the distance for OSPF inter-area routes.
• Intra-Area - Specifies the distance for OSPF intra-area routes.
• External-1 - Specifies the distance for OSPF external type-5 and type-7
routes with a type-1 metric.
• External-2 - Specifies the distance for OSPF external type-5 and type-7
routes with a type-2 metric.
Enter the administrative distance value here. The range is from 1 to 255.
Select to enable or disable the Default Originate Information state here. This
feature is used to generate a default external route (type-5 LA) network 0.0.0.0 to
the AS.
Select the Originate option here. Options to choose from are Always and None.
Selecting the Always option specifies to always generate the default route
regardless of existence of a default route in the redistributed routes.
Enter the cost value associated with the generated default route here. If not
specified, the default metric cost is 1. The range is from 1 to 65535.
Enter the ECMP value for this process here. The range is from 1 to 32.
250