Tacacs Server Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in TACACS Global IPv4 Source Interface are described below:
Parameter
IPv4 TACACS Source
Interface Name
Click the Apply button to accept the changes made.
The fields that can be configured in TACACS Global IPv6 Source Interface are described below:
Parameter
IPv6 TACACS Source
Interface Name
Click the Apply button to accept the changes made.

TACACS Server Settings

This window is used to display and configure the TACACS+ server settings.
To view the following window, click Security > TACACS > TACACS Server Settings, as shown below:
The fields that can be configured are described below:
Parameter
IP Address
IPv6 Address
Port
Timeout
Key Type
Figure 9-34 TACACS Global Settings Window
Description
Enter the name of the IPv4 TACACS+ source interface here.
Description
Enter the name of the IPv6 TACACS+ source interface here.
Figure 9-35 TACACS Server Settings Window
Description
Enter the TACACS+ server IPv4 address here.
Enter the TACACS+ server IPv6 address here.
Enter the port number used here. This value must be between 1 and 65535. By
default, this value is 49.
Enter the timeout value here. This value must be between 1 and 255 seconds. By
default, this value is 5 seconds.
Select the key type that will be used here. Options to choose from are Plain Text
and Encrypted.
478