Vlan Tunnel; Dot1Q Tunnel - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Type
Click the Apply button to accept the changes made.
The fields that can be configured for Private VLAN Association are described below:
Parameter
VID List
Action
Secondary VID List
Click the Apply button to accept the changes made.
The fields that can be configured for Private VLAN Host Association are described below:
Parameter
Unit
From Port - To Port
Primary VID
Secondary VID
Click the Apply button to accept the changes made.
The fields that can be configured for Private VLAN Mapping are described below:
Parameter
Unit
From Port - To Port
Primary VID
Action
Secondary VID List
Click the Apply button to accept the changes made.

VLAN Tunnel

Dot1q Tunnel

This window is used to display and configure the 802.1Q VLAN tunnel settings.
An 802.1Q tunnel port behaves as a User Network Interface (UNI) port of a service VLAN. The trunk ports which are
tagged members of the service VLAN behave as the Network Node Interface (NNI) ports of the service VLAN.
Description
Select the type of private VLAN that will be created here. Options to choose from
are Community, Isolated, and Primary.
Description
Enter the private VLAN ID list here.
Select the action that will be taken for the private VLAN here. Options to choose
from are Add, Remove, and Disabled.
Enter the secondary private VLAN ID here.
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here. Select the
Trunk option to specify that the trunk port will be associated with the private
VLAN host association.
Enter the primary private VLAN ID here.
Enter the secondary private VLAN ID here. When ticking the Remove
Association option, specifies that this configuration will not be enabled.
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here. Select the
Trunk option to specify that the trunk port will be associated with the private
VLAN map.
Enter the primary private VLAN ID here.
Select Add to add a new entry based in the information entered.
Select Remove to remove an entry based in the information entered.
Enter the secondary private VLAN ID here. When ticking the Remove Mapping
option, this specifies that this configuration will not be enabled.
148