D-Link DGS-3630 Series Reference Manual page 213

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
The fields that can be configured in VLAN Status Settings are described below:
Parameter
VID
Click the Apply button to accept the changes made.
The fields that can be configured in PIM Snooping Table are described below:
Parameter
VID
Click the Find button to generate the display based on the information entered.
PIM Snooping Neighbor Table
This window is used to view the PIM snooping neighbor table.
To view the following window, click L2 Features > L2 Multicast Control > PIM Snooping > PIM Snooping Neighbor
Table, as shown below:
The fields that can be configured are described below:
Parameter
VID
Click the Find button to generate the display based on the information entered.
PIM Snooping Mroute Table
This window is used to view the PIM snooping multicast route table.
To view the following window, click L2 Features > L2 Multicast Control > PIM Snooping > PIM Snooping Mroute
Table, as shown below:
Description
Enter the VLAN ID on which the PIM snooping feature will be used here. The
range is from 1 to 4094. Select to enable or disable the PIM snooping feature on
the specified VLAN here.
Description
Enter the VLAN ID that will be used in the display here. The range is from 1 to
4094.
Figure 5-91 PIM Snooping Neighbor Table Window
Description
Enter the VLAN ID that will be used in this display here. The range is from 1 to
4094.
201